Pressure Vessel Seawater, 2.5 x 80 Inch, 1000PSI Max, 1/4 Inch I/O

Fiberglass pressure vessel for two 2.5" diamter seawater membranes with a 40" length. 1000PSI max operating pressure. Vessel comes with all necessary hardware except for mounting hardware.

• Durable non-corrosive fiberglass housing in natural color. White color finish optional.
• End entry feed and brine ports are standard on all models
• Anodized Aluminum Retaining Clamp locking devices for easy installation
• Flush mount anodized aluminum* or acetal co-polymer* end plugs with S.S. backing plates make fitting installation effortless
• Maximum separation between permeate port and feed/concentrate port allow the use of large fittings
• Ethylene propylene FDA approved "O" rings are standard. Silicon and other compounds available upon request
• Universal style models also manufactured to fit membrane of your choice. Other lengths available upon request

*Hard anodized aluminum is corrosion resistant but not non-corrosive. They can be very durable under some circumstances but sometimes can corrode quicker than others depending on conditions. With the Acetal end plugs, corrosion is avoided but runs the risk that the end caps can crack between ports; if fittings are installed too deep or if there is vibration present during operation - this condition does not occur with the anodized aluminum.